MTC 9000 Scrolling

Txny Mxnrxe

Member
Joined
Sep 13, 2010
Messages
210
Reaction score
3
Location
Duluth, Minnesota
My Hantarex MTC 9000 is having a problem with scrolling. When I first received this cabinet it played blind. I have replaced the caps and the flyback and now the monitor works. I also have replaced all of the pots on the remote board as well and no amount of tweaking seems to fix this. I can get the picture locked in for a second and then it will jump all over as if the vertical frequency pot is twisted from side to side.. I am stumped, am I missing another adjustment pot or could it be another problem all together?
 
sync

Check and see if you have two sync wires in your plug. Ifso, then try with only one sync wire on the outside pin.
 
Back
Top Bottom