Mtc 9000 flyback focus problem

dyno

Well-known member
Joined
Apr 11, 2009
Messages
1,644
Reaction score
81
Location
Lower Mainland, Britsh Columbia
Just put a new flyback in my mtc 9000 and it seems that the focus adjustment isn't working, nothing happens when I turn the adjuster. I am not familiar with this monitor so i was wondering if there is another focus adjuster on the chassis that I am suppose to use also along with the one on the flyback.
 
Check to make sure you properly connected the focus wire to the neck socket, or that the focus pin on the neck isn't bent...
 
Just got back inside from taking a look at it and that was the problem, the pin in the socket wasn't making proper contact with the neck pin. All good now, thanks for your help.
 
Back
Top Bottom