Ms Pacman transformer fuse type?

wantdataeast

Member
Joined
Jun 4, 2015
Messages
210
Reaction score
19
Location
Kentucky
There are two fuses on this transformer I know they are likely wrong, what is the correct fuse type? My manual only has the fuse type for the 3 fuses type that are mounted to a fuse block... That is not this type, this type has the metal case (i have seen this called a suitcase type transformer assembly)

Anyway, I need the correct voltage type for the are circled.
 

Attachments

  • IMG_7029circled.jpg
    IMG_7029circled.jpg
    487.9 KB · Views: 35
that isn't original to ms pacman. that suitcase power supply is like galaga so i would check the manual for galaga which i would think would have the fuse type and rating.
 
Galaga was just the 2 transformers on wood too. this looks slightly Super Pac-esque, but even that was different from this.

there was a thread a few months back about some of the later Ms. Pacs getting this arrangement instead.

according to this picture from Bob Roberts the line and monitor fuses are 2A slo-blo.

pacfuse.jpg


I strongly encourage replacing the fuse holders on both sides. we have a few of these games at work and they can get corroded enough the whatever's connected to them won't work anymore (cocktail GIs, Galaga monitor), or worse yet, your PCB voltages off the 4 fuse holder will be corroded enough to where they restrict voltage to the board and eventually can burn the edge connector up.

this applies to all Midway games of that era.
 
Galaga was just the 2 transformers on wood too. this looks slightly Super Pac-esque, but even that was different from this.

there was a thread a few months back about some of the later Ms. Pacs getting this arrangement instead.

according to this picture from Bob Roberts the line and monitor fuses are 2A slo-blo.

Correction... Yes this is a Pac-Man jr conversion kit
 
Back
Top Bottom