Ms. Pac Man Cocktail Table

OIB1981

Member
Joined
Jan 13, 2010
Messages
711
Reaction score
2
Location
West Virginia
What am I missing from this Ms. Pac Man Cocktail table. I think I'm missing the Harness and Chassis. Anything else?

 
Last edited:
I've got an extra GO7 chassis and tube. Not sure if the Tube in Ms. Pac Man a GO7 or not. so really I guess all I need is the harness.
 
Think the above is talking about the monitors main pcb and neck board.

Yes.. sorry I didn't clarify. looks like you'll need the HV section of the monitor as well for that G07. I know Chad, ArcadeCup, carries some of the monitor stuff to get you going...
 
That's not a GO7 monitor mount plate in there and that yoke connector doesn't look like GO7 spacing either. Usually 4600's had dual rails, but even those seem odd.

I suspect someone has mounted a different monitor and hardware in there at some point, you should have a solid mounting plate for the monitor chassis if it's a GO7.
 
Crap, looking at this picture I thought it looked familiar!
Call me and we can strip out one of the tables I have. I don't think I'll be using the PacMan harness I have. Will have an extra coin box and everything to get you mostly complete!!!!
 
Hey, can I Hijack this thread?

I'm missing something in my PacMan table too!!
81710308.jpg
 
That is the best looking picture I ever saw!
 
Last edited:
Let me take a wild guess and say, hmmm, the bottom?

Yep!! ;)
How did you guess?

Mold kinda made up for the bottom I thought.

Actually gonna save this one, but your welcome to the harness (or the harness from the Galaxian table). I Got a trashed chassis in a trade deal, so I'll replace that broken neckboard. Tube is broken too, so the work is gonna be basically a complete rebuild.

Anyway, will likely have the parts you need if your going dedicated.
 
Back
Top Bottom