Ms.Pac/Galaga Reunion Cab - Volume Pot size question

[gt7766c]

Ms.Pac/Galaga Reunion Cab - Volume Pot size question

I need to replace the volume pot for a friend's machine that lives 1.5 hours away so I need to make this a one trip repair. The pot is completely corroded and fell apart and looking to replace with the exact same form factor.

Looking through the threads I see some conflicting info. One says it's 100 ohms and another says 1k ohms. Which is it?

Also need the same size to mount (e.g., 1/4") and the diameter of the metal rod to be the same so the stock black plastic knob fits over.

Any help is appreciated. I tend to buy my parts through Newark so any part numbers are extremely helpful. Thanks all.

Kris
gt7766c

 

[tonyt76]

Bump, also looking for this info.

 

[mecha]

might be 1k, it's a common Namco value. 100 ohm isn't enough for volume.

 

[tonyt76]

might be 1k, it's a common Namco value. 100 ohm isn't enough for volume.

The pot on the PCB yes, I'm referring to the volume pot next to the test button.