Ms Pac Cocktail - Will the Arcade Shop PS converstion kit fit?

nanoryan

Well-known member
Joined
Jun 5, 2006
Messages
1,337
Reaction score
248
Location
Washington
Ms Pac Cocktail - Will the Arcade Shop PS converstion kit fit?

Hey guys, might be making a house call to get a Ms Pac cocktail working.

The game is completely dead. I assume it will probably be something simple (I hope) but if it is a power supply issue I might consider one of the AS switcher conversion kits. Anybody know if the supplied adapter PCB will have proper clearence in a cocktail? I know space is tighter than in an upright.

Thanks!
 
Sure, although I'd skip the adapter board and just connect the wires to the game pcb directly. Then you just need a switcher. Saves money and works just fine.

http://www.twobits.com/DCpac.gif

Mount the switcher on the bottom of the cab below the speaker, or on the lower front side wall between the coin door and the game pcb...
 
Sure, although I'd skip the adapter board and just connect the wires to the game pcb directly. Then you just need a switcher. Saves money and works just fine.

http://www.twobits.com/DCpac.gif

Mount the switcher on the bottom of the cab below the speaker, or on the lower front side wall between the coin door and the game pcb...

Awesome! Thanks :)
 
Back
Top Bottom