Mr. and Ms. PAC upper flipper leaf switch.

[Buffett]

the upper flipper leaf switch is broke and i need another one.

the problem is every where i look i cannot find the correct switch i need.

i am not a pin guy and don't quite know what i need.

there is no saving this switch as it is 98% broke loose where it flexes and if you shrink it down a bit back into the lamination it will be to short.

i don't mind buying a new one but a used one for a couple bucks shipped will work just fine for me.

it is 2-3/4" total in length including the solder tabs.

any help would be great to get my game back up and running again.

playing it with this flipper broke is not much fun.

please shoot me a PM if you have one you would like to part with.

or post me a direct link to what i need to buy.

thanks all for the help.

Peace
Buffett

 

[LTG]

http://www.pbresource.com/

Contact Steve young. He'll have it.

LTG : )

 

[Buffett]

http://www.pbresource.com/

Contact Steve young. He'll have it.

LTG : )

thanks i will book mark that for the future.

Peace
Buffett

 

[vintageclub]

I combined two Mr. and Mrs. Pacs to make one great one. I should have that part in my Mr. and Mrs. Pac graveyard box. I'll look when I get home later in the week.

 

[Buffett]

I combined two Mr. and Mrs. Pacs to make one great one. I should have that part in my Mr. and Mrs. Pac graveyard box. I'll look when I get home later in the week.

awesome that would be great.

i think i need a couple cosmetic pieces as well i will have to look.

if you have them i could use them to.

Peace
Buffett

 

[vintageclub]

No guarantees on the cosmetics... one of the machines had all the boards and parts but was in a barn with no topglass for 15+years, so the mechanical parts and switches are useful but the cosmetics are toast for the most part. Let me know and I'll see what I have for sure, though.

 

[Buffett]

No guarantees on the cosmetics... one of the machines had all the boards and parts but was in a barn with no topglass for 15+years, so the mechanical parts and switches are useful but the cosmetics are toast for the most part. Let me know and I'll see what I have for sure, though.

cool sounds good.

if i don't have it or it is broke, then it would be cool to at least have it on there.

i will be looking forward to what you have.

Peace
Buffett

 

[vintageclub]

Here's one of the switches I pulled from a flipper mech in my box of Mr/MrsPac parts. Its in good working condition.

 

[Buffett]

Awesome!!

PM sent.

Peace
Buffett