MMAO - Game: mr. and mrs pacman pinball abingdon va

mcdeez

Member
Joined
May 10, 2010
Messages
118
Reaction score
0
Location
Virginia
Rating - 100%
8   0   0
i picked this machine up non working but in decent shape. right now no sound and no display. lights and solenoid tests seems to work.
so far i have rebuilt the rectifier board i also have a new rubber kit, plunger springs, at least 2 boxes of both sets of bulbs(playfield and pac maze), and a squak and talk cap kit. both back glasses are in good shape, no tears or burns. almost all the playfield plastics have been removed since i planned on cleaning and replacing bulbs and rubbers. just lost interest in restoring and would prefer something i can play now.

make an offer or i would trade it in on another working pin or arcade cab.
 
I also removed the original battery on the mpu and there doesn't appear to be any corrosion, and i see a total of 7 flashes on the green led on power on.
 
The game is very nice, thanks so much!

Haven't fixed the sound or the displays yet, but if I do, I'll post it for the repair logs here.

-Pat
 
There was a break in the wiring to the speaker. Now the speaker works, but the sound just is a loud hum, no sound, no speech. Cap kit will be done soon, which should fix the problem.

And the fuse on the solenoid driver board was blown. I luckily had an extra (these are very hard to come by), and the displays work. But the one under the playfield is not.

-Pat
 
Got the sound working.

The volume pot was missing on the sound board for the sounds, and I broke the speech one off. Replacing both of these got the sound working.

-Pat
 
Back
Top Bottom