Motorola KV700A & WG 19V1001 Yoke Identification

arcaderehab

Member
Joined
Jul 25, 2008
Messages
108
Reaction score
6
Location
Oradell, New Jersey
Motorola KV700A & WG 19V1001 Yoke Identification

I have a Space Invaders Deluxe with a 19V1001 chassis. I have a case of foldover on the left side, and the "pixels" seem to be spread out on the left side and condensed on the right.

The yoke may just need to be adjusted, but I'm not convinced that I have the correct yoke and chassis combination, since the game came with a dead unconnected KV700A and I hooked up a V1001 years ago before I put this in game in storage. I honestly don't remember if I ever made sure it was be compatible.

How can I identify what the correct yoke is? Does anyone have the proper yoke resistance values I can use to compare?

Appreciate any help!
 
Are any of the part numbers still on the yoke? Motorola yokes start with a 24D number....a Wells-Gardner will be a 9A number.

Edward
 
Back
Top Bottom