Mortal Kombat sound board power cable parts

Radford119

Well-known member

Donor 2011, 2023
Joined
Aug 15, 2010
Messages
1,869
Reaction score
876
Location
Indiana
Anyone know off hand what type of connector is necessary to build an MK sound board harness? The power cable, not the ribbon. I think it is a .156 but am not 100% sure. Any help would be greatly appreciated. Attached is a picture of the header.
 

Attachments

  • _MG_0058.jpg
    _MG_0058.jpg
    63.2 KB · Views: 17
just buy the whole harness from bob(bobroberts) $7.50 each (power/volume pot/ribbon).
 
just buy the whole harness from bob(bobroberts) $7.50 each (power/volume pot/ribbon).

Thank you for a source for the original cable. I am working on a multi MK machine and would like to mount the sound boards in a different location(further away from the main board). So I would like to make a custom one.
 
bobs cable is quite long so unless your talking more than a foot or so from the board yea i guess you'll need a custom one (or buy bobs and solder n' shrinkwrap as much wire as you'd like).
 
Bump. Anyone know the type of the connectors needed?
 
.156 female flat molex.

in my experience they're kind of a pain to crimp properly, so just buy Bob's instead. :p
 
Back
Top Bottom