Mortal Kombat II PCB to Soundboard

Phetishboy

Well-known member
Joined
Dec 12, 2006
Messages
47,929
Reaction score
9,392
Location
Avon, Minnesota
What plugs in where, and can I see a pic of it plugged in? I have both boards and the ribbon cable, but I have never seen an MK-style board before and don't wanna plug something in the wrong spot or backwards. My board works, but I won't have sound until one of you fine gents helps me out.
 
it's very easy, assuming your wiring harness is complete and unmolested.

the power/speaker harness runs from P3 on the main board to P1 on the sound board. simply make sure the pin 1s on each header are faced the same way (if that makes sense)

do the same for the ribbon cable, align the red striped end with the pin 1/2 side of the P12 header on the main board and the other striped end to pin 1/2 on P4 of the sound board side.

much easier than MK1. :)
 
Back
Top Bottom