Mortal kombat 1 coin connector question+ pics

theforce19

New member
Joined
Jul 9, 2010
Messages
166
Reaction score
0
Location
Winnipeg, Manitoba, Canada
Hi, everybody I finally was able to get a original mk1 and I have a question, I need an id on a connector. The first three pictures are pics of the connector that I need an Id on. The last two pics are of the unknown connector, connected to the main coin harness. I know what the cable does but I need to know what connector it is.(ex.molex kk housing something).


Thanks


theforce19
 

Attachments

  • Photo140.jpg
    Photo140.jpg
    93.7 KB · Views: 17
  • Photo141.jpg
    Photo141.jpg
    95.8 KB · Views: 15
  • Photo142.jpg
    Photo142.jpg
    94.6 KB · Views: 14
  • Photo143.jpg
    Photo143.jpg
    71.5 KB · Views: 23
  • Photo144.jpg
    Photo144.jpg
    76.3 KB · Views: 16
Last edited:
No problem. From the pics I am 95% sure I am correct there. What are you looking to do, change the connector type? Reproduce? The beauty of molex connectors is the versatility.
 
I need to buy more of these connectors to connect the rest of the wires that need to be connected to the coin harness, like coin 1 or coin 2. The reason I asked about the connector is because my jamma harness that I bought came with quick connect terminals instead of molex connectors so I'm going to switch the connectors on there.
 
Well sorry to reserect a dead thread but, I ordered these off of jammaboards like a month ago and they finally came. But, they don't fit.... did I order the wrong ones?? Of course I needed a 7 pin and it arrived as a 7pin but not even close to fitting?
 
Well, if I'd have gotten your message earlier, I could have looked on my extra MK1 Jamma harness to see if I had the connector. I would have been more than willing to lop it off and send it to you but alas, I am now in Mississippi and won't be home for months.
 
Last edited:
Bumping this one. The original connectors were insulation displacement type, but the KK .100 style works also. Anyway the big reason I bumped this thread...has anyone come across a source for these "z" style interconnects? They look like 2 header pins back to back. Pinballlife.com has a 2 pin version, but in addition to needing one that's 14 pin, I think theirs is a .156 pitch so that wouldn't fit anyway. Here's the pic from their website. Anyone have a source for these? I may just be not searching for them by their correct name, but this is the only site I've seen list them.

mwws156-1602.jpg
 
Back
Top Bottom