More Toobin Help needed.

jeff412

New member
Joined
May 1, 2009
Messages
893
Reaction score
0
Location
Buna, Texas
I have a toobin with no sound. All of the sound tests pass, but I don't hear anything. I've checked all of the obvious stuff. Volume, speakers connected, etc. I've ordered a new processor even though it says it is good. There are several LED's on the board. Does anyone know what they indicate. This is one near each audio amp. They are both lit. Does that mean the amps are good or bad or neither?

Thanks for the help

Jeff
 
Found part of the problem. Evidently I had a bad speaker, even though the one in there looked mint. Now I have intermittent sounds. Sometimes it works and sometimes it doesn't. Sometimes only some sounds play. I've check the voltage and I'm right at 5 V on the sound board. Does anyone have any suggestions?
 
Back
Top Bottom