More monitor repair guides and schematics posted

MR.Layton..i Need to Pick Yer Brain !

Mr.Layton...i need to pick yer brain about the 25K5108 AKA U5000 Monitor..


i have one in my Crusin World and it powers up and gives me Green Tint with almost no red (very Little ) and NO blue as far as i can see....now i remember a few posts of kits from wells that you have posted but i don't see them anymore and since yer the monitor expert..i figured i'd pick Your Brain about this issue :)


so what can ya tell me that you may know about this issue that may help me fix this :) PLEASE :)

and yes i Have repaired monitors before..but i've never had this kind of wells... i stopped working on monitors in 96. ...lol so seems i gotta learn the new ones ..

so i kindly wait for your friendly response :)


END OF LINE.


Daniel.
 
Last edited:
Mr.Layton...i need to pick yer brain about the 25K5108 AKA U5000 Monitor..


i have one in my Crusin World and it powers up and gives me Green Tint with almost no red (very Little ) and NO blue as far as i can see....now i remember a few posts of kits from wells that you have posted but i don't see them anymore and since yer the monitor expert..i figured i'd pick Your Brain about this issue :)


so what can ya tell me that you may know about this issue that may help me fix this :) PLEASE :)

and yes i Have repaired monitors before..but i've never had this kind of wells... i stopped working on monitors in 96. ...lol so seems i gotta learn the new ones ..

so i kindly wait for your friendly response :)


END OF LINE.


Daniel.
check the transistors on the neck board, they get so hot they literally burn up the board and traces, good place to start.
 
check the transistors on the neck board, they get so hot they literally burn up the board and traces, good place to start.

HIYA PAUL ! :)

good to see ya again :D

yeah i noticed the trans on my neckboard and they looked ok tho the board is slightly discolored so i will check it and see if those are bad.... and (MR LAYTON) i have no way to get the tube checked...so i'm kinda stuck if thats gotta be checked...

BTW paul...if it's possible.since yer a floridian like me...shoot me a email ..i'd like to ring ya and pick yer brain about this some more if it's ok with you...since i have this crusin world and my stun runner i'm gonna be trying to get fixed i'd like to have a fellow gamer to bounce stuff off of :)


Thanks Guys :)



END OF LINE.


Daniel.
 
K7000A manual found

I have now found and scanned an ORIGINAL Zenith/Wells-Gardner K7000A manual. All the scans are now cleaned up and Chad is combining the individual page scans into a complete pdf manual to be made available shortly. The K7000A manual is made to be used in conjunction with the regular K7000 manual.

I know people have been looking for this K7000A manual for years and I was blessed to locate a good condition original manual. I will be able to post it shortly. In the meantime, here is a look at one of the pages.
 

Attachments

  • K7000A3.pdf
    33.7 KB · Views: 164
Coming soon, a previously unknown Wells-Gardner monitor manual for a model called the "Customizer 2". It's a black & white (or amber or green were available) monitor that runs on 12 volts DC. Very similar to the Kristel and Omnivision monitors that were used in the Arachnid "English Mark Darts" Super Six (a.k.a. the 6000 series) machines.
 
I have now found and scanned an ORIGINAL Zenith/Wells-Gardner K7000A manual. All the scans are now cleaned up and Chad is combining the individual page scans into a complete pdf manual to be made available shortly. The K7000A manual is made to be used in conjunction with the regular K7000 manual.

I know people have been looking for this K7000A manual for years and I was blessed to locate a good condition original manual. I will be able to post it shortly. In the meantime, here is a look at one of the pages.

Thanks for this!
 
Last edited:
Back
Top Bottom