More Daytona USA problems...

8bitnintendo

Well-known member
Joined
Apr 23, 2008
Messages
4,424
Reaction score
351
Location
Rocklin, California
I almost have this thing completely running and working, except for the gas pedal was not working properly, when I start a race it would decelerate to 0mph and not go anywhere, but when I am in the menu to choose my track and auto/manual setting, it will let me choose...

the brake worked, so I swapped the pot from the brake to the one for the gas, and it does the same thing... what is going on here?
 
is there a pedal calibration in the setup screen? I know some racers like Cruisin' USA have you push the pedal all the way down during calibration so that it can tell the range of the pot so it know what is zero and what is floored....
 
I went in there and there is an output section that when I press the gas pedal it shows that it is increasing in numbers... nothing that I saw to really calibrate it...
 
Back
Top Bottom