More Centipede parts FS, Free cocktail cabinet Reno

TheDrewster

Well-known member

Donor 2012
Joined
Oct 5, 2008
Messages
7,668
Reaction score
314
Location
Reno, Nevada
Rating - 100%
112   0   0
More Centipede parts FS, Free cocktail cabinet Reno

I have:

2 fully working PCBs, $60 shipped each.

2 complete but untested control assemblies, disassembled and cleaned, but again, not tested. Includes complete trackball assy, start button switch, fire switch, and wiring harness. $15 shipped each or both for $25 shipped. Will need to be rebuilt I imagine.

And the cabinet that everything came in is FREE! That includes the JAMMA harness, working ARII, coin mech, non-working monitor, and incomplete power supply. FREE in Reno NV. It will be going to the dump Tuesday morning if nobody grabs it. For pics, see my auction:

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=120521642268&ssPageName=STRK:MEUSX:IT
 
Do you not have room? I actually think that would make a pretty cool 60 in 1 cab.

I would 60 in 1 that shit, if you hold it until we can figure something out.

I can't just shoot over to reno anytime soon I don't think though.
 
Do you not have room? I actually think that would make a pretty cool 60 in 1 cab.

I would 60 in 1 that shit, if you hold it until we can figure something out.

I can't just shoot over to reno anytime soon I don't think though.

I would rather 60-in-1 an upright, I am not a cocktail fan, that is, unless someone could show me step by step what I need and how to do it.
 
I would rather 60-in-1 an upright, I am not a cocktail fan, that is, unless someone could show me step by step what I need and how to do it.

Just like setting up an upright, just with 2 control panels. Wire it up just like a 2 player upright and set a dip switch for cocktail mode.

Even if your not a cocktail guy, do it anyway, put it on CL for a reasonable price and watch it fly out the door with cash in your pockets :D
 
If you have no takers I would really suggest you keep the monitor rather than junk it. It's really likely it can be fixed. Or you could identify the model and buy a working chassis to get it working. An extra monitor would have saved you some headache when you broke the tube on that centipede some time back. Just saying.
 
It appears to be a one sided cocktail.

It would be set just like an upright, with the upright settings on the
game board.

I'll take it if you can hold it.
 
You guys inspired me to 60-in-1 it. I have a switcher and buttons ready to go, joysticks and new fresh harness are on the way. Now all I need is a PCB and a monitor. I will be using an old PC monitor, so theoretically, all I need right now is a PCB. This will be fun. Anybody got a cheap one? :D
 
You guys inspired me to 60-in-1 it. I have a switcher and buttons ready to go, joysticks and new fresh harness are on the way. Now all I need is a PCB and a monitor. I will be using an old PC monitor, so theoretically, all I need right now is a PCB. This will be fun. Anybody got a cheap one? :D

If you are using the original CP's (2 trackballs) make sure you get one that will support both of them, and get 2 wire harnesses. Nixs has your PCB and I believe Bob Roberts has the TB harnesses.

BTW I put up my Centipede PCB in another thread in hopes I can buy one of yours. Ill keep you posted on that. Thanks.
 
If you are using the original CP's (2 trackballs) make sure you get one that will support both of them, and get 2 wire harnesses. Nixs has your PCB and I believe Bob Roberts has the TB harnesses.

BTW I put up my Centipede PCB in another thread in hopes I can buy one of yours. Ill keep you posted on that. Thanks.

I am going to substitute the trackballs for joysticks for this one. The trackballs were in rough shape and I am just going to sell the TBs or save them and rebuild them for future Atari projects.
 
If you aren't going to use trackballs, buy a 48 in 1 or a 60 from nixs.

If you are going to use trackballs, buy the board from avidcollect.
His have always supported dual trackballs from the board to harness connection in my experience.

fucker, I wasn't inspiring you, I wanted the cabinet. lol
 
Back
Top Bottom