monitor swap

Sikpuppee

New member
Joined
Aug 22, 2009
Messages
51
Reaction score
0
Location
California
does anyone know if a Wells Gardner 25K7401 monitor can be used to replace a Wells Gardner 25K7193 monitor. The Wells Gardner crossover page shows that they both upgrade to WGM2574-U4GS33A , but sometimes weird things happen and they don't cross the other way.


Thank You
Sik
 
does anyone know if a Wells Gardner 25K7401 monitor can be used to replace a Wells Gardner 25K7193 monitor. The Wells Gardner crossover page shows that they both upgrade to WGM2574-U4GS33A , but sometimes weird things happen and they don't cross the other way.


Thank You
Sik

The 7401 will work in the place 7193.

Matt
 
The power connector is different on the 7400 series vs the 7193.

The 7400 uses a 3 pin AMP brand connector directly on the monitor main board.

The 7193 uses a 2 pin Molex connector on the end of a short cable coming from the monitor main board.

You're going to need Wells-Gardner part # 038A8059-000 Power adapter dongle to use the 7400 monitor in place of the 7193. See the attached photo.
 

Attachments

  • 038A8059-000 power adapter.jpg
    038A8059-000 power adapter.jpg
    31.3 KB · Views: 19
thank you ken, I've been wondering about that as it said at the crossover that I needed a 038A adapter, but I couldn't find the full part number



Sik
 
Back
Top Bottom