monitor remote board part question...

cobalt_boxx

New member
Joined
Jan 8, 2011
Messages
6
Reaction score
0
Location
Fort Worth, Texas
Please excuse the noob question but I have a pinball background and don't have much experience w/ vids.

I have an Eygo 27" VGA monitor that 2 of the pots have broken on the remote board. I could not find anything that looked similar in the Mouser catalog. Could someone please help me identify the type of pots I need? I know one is 100K and the other is 300K. I have attached pics.
 

Attachments

  • remoteboard1.jpg
    remoteboard1.jpg
    78 KB · Views: 8
  • remoteboard2.jpg
    remoteboard2.jpg
    69.8 KB · Views: 8
  • remoteboard3.jpg
    remoteboard3.jpg
    94.2 KB · Views: 10
See if this helps any ....... http://www.therealbobroberts.net/pots.html
Yours would be like the Type C.
You'll have to scroll down throughout the page to find all the Type C's as Bob has added some here and there and they are not all grouped together.

Did you get those values right off the broken pots ? (the 300K is kinda odd)
 
I appreciate the fast response! Yes, the values are printed on the bottom of the pots. I will take a look on Bob Roberts site and see what I can find.
 
Pots... Help still needed...

Bob Roberts did not have the 300K pot. What would be the correct technical name for these so I can google this and find the right part?
 
Finding a 300K in that exact package style may be tricky......but try "trimmer resistor", "carbon potentiometer", or some variation of those words.

A 250K or 400K Ohm may work in it's place in a pinch.
 
Back
Top Bottom