Monitor Query to Flip the Screen

justonemonth

New member

Donor 2011
Joined
Apr 14, 2011
Messages
32
Reaction score
0
Location
Yorkshire, United Kingdom
I had a faulty screen on an Outrun and have put another monitor in but the picture is upside down. Normally I'd just change to the other set of pins on the chassis to flip it but there's no extra pins on the chassis I've got. Does anyone know how to flip the screen on this? Its an Hitatchi tube and there's no markings on the chassis for the model.

Here's a couple of pictures of the chassis.

http://www.justonemonth.com/chassis1.jpg
http://www.justonemonth.com/chassis2.jpg

Cheers,
Simon
 
http://homearcade.org/BBBB/yoke.html

Split the yoke connector in half, right between the red and yellow wires so that you have two "pairs" of wires.....red and blue ... green and yellow.
(you'll have two smaller connectors now, each with it's own pair)

If it's just upside down - reverse the Green and Yellow.
If the writing is backwards - reverse the Red and Blue.

Do NOT attempt to plug green/yellow where red/blue came from and vise versa.
After splitting the connector simply unplug the green and yellow, flip it and plug it right back in the same two pins. Same for red and blue if need be.
 

Attachments

  • chassis1.jpg
    chassis1.jpg
    98.5 KB · Views: 9
Back
Top Bottom