Monitor or PCB issue

mochaman

Active member
Joined
Feb 10, 2012
Messages
898
Reaction score
35
I picked up a Millipede that works but seems to have a graphic glitch. So I figured I'd go thru the self-test screens and on the self-test screen 2, (Color chart), should show black in lower left corner to white to top right with red and blue in other corners. That is not what I have. See pic please. Would this be a pcb issue or a monitor (G07-CBO) issue?
 

Attachments

  • DSC_0391.jpg
    DSC_0391.jpg
    111.2 KB · Views: 15
  • DSC_0392.jpg
    DSC_0392.jpg
    113.2 KB · Views: 17
Last edited:
Screen shot of glitch

Here are some screen shots of the "glitch". Very noticeable on the DDT bombs. I imagine this is a board issue? Possible "sync" issue?
 

Attachments

  • DSC_0394.jpg
    DSC_0394.jpg
    99.4 KB · Views: 11
  • DSC_0396.jpg
    DSC_0396.jpg
    98.4 KB · Views: 10
  • DSC_0397.jpg
    DSC_0397.jpg
    100.9 KB · Views: 9
  • DSC_0398.jpg
    DSC_0398.jpg
    100.9 KB · Views: 9
Personally I think you've got two problems, the monitor doesn't have any green and the board has a minor glitch like you see on the DDT graphics. It's possible that the missing green is a problem with the board as well.
 
Back
Top Bottom