Monitor ID's

Joined
Apr 24, 2011
Messages
353
Reaction score
21
Location
Hollister, California
I am trying to ID a few monitors so I can go buy cap-kits.
Should be relatively easy but some of the numbers on the back on a few of them are similar but not exact so want to be sure..


I have:

Stargate - Pretty sure its a WG monitor but not sure which
Pac-Man -- I have several of these cabs -- Wells Gardner
Black Tiger Jamma cab
Wizard of Wor
Gorf

I will post pictures onto this thread for help in the ID.

Thank you!!!
 
Ok, here are some pics...apologize if rhey are blurry, etc...tell me what you think, if possible.
 

Attachments

  • IMG_8359.jpg
    IMG_8359.jpg
    500.5 KB · Views: 5
  • IMG_8358.jpg
    IMG_8358.jpg
    517.5 KB · Views: 7
  • IMG_8357.jpg
    IMG_8357.jpg
    511.8 KB · Views: 24
  • IMG_8356.jpg
    IMG_8356.jpg
    512.1 KB · Views: 8
  • IMG_8353.jpg
    IMG_8353.jpg
    540.3 KB · Views: 5
Thanks everyone.

K4600 Cap-Kit

Asteroids:
G05-802 (cap kit)
HV-Cage (cap kit)
Asteroids plastic bezel
Asteroids AR board repair / cap kits ( I have 3 to send in)

And someone to send my G05-802 deflection board and HV Cage to for repair.

(I have 2 Asteroids games..one is ok and just needs a cap kit, the other one has been capped but isnt displaying anything...confirmed its the monitor by swapping the good one in the game and game suddenly worked..screen is displaying....so I know I have a monitor issue)

In addition, just for completeness, I need to send in my Williams Stargate PCB in for a check-up..it comes up with a RAM error and there is a line glitch across the screen.

I need a Space Invaders board set repaired. One has a bit shifter error and the other is unknown. ( I have 2 SI board sets)

The Williams Stargate monitor needs to be recapped I think...so would like to get a kit..but may wait until the board has been checked...



So, with that list, could I send these boards all to the same place for repair or do they need to go different places?
 
Thanks everyone.

K4600 Cap-Kit

Asteroids:
G05-802 (cap kit)
HV-Cage (cap kit)
Asteroids plastic bezel
Asteroids AR board repair / cap kits ( I have 3 to send in)

And someone to send my G05-802 deflection board and HV Cage to for repair.

(I have 2 Asteroids games..one is ok and just needs a cap kit, the other one has been capped but isnt displaying anything...confirmed its the monitor by swapping the good one in the game and game suddenly worked..screen is displaying....so I know I have a monitor issue)

In addition, just for completeness, I need to send in my Williams Stargate PCB in for a check-up..it comes up with a RAM error and there is a line glitch across the screen.

I need a Space Invaders board set repaired. One has a bit shifter error and the other is unknown. ( I have 2 SI board sets)

The Williams Stargate monitor needs to be recapped I think...so would like to get a kit..but may wait until the board has been checked...



So, with that list, could I send these boards all to the same place for repair or do they need to go different places?


i have every kit but if your sending the g05 out i would contact andrewb on here for repair.
 
Every kit meaning cap kits? What about board checks and repairs?

we have many hundreds of different kits and not all are cap kits. repairs not until further notice because its way too time consuming getting everything on the site plus i haven't been able to work on my own stuff for a very long time.
 
we have many hundreds of different kits and not all are cap kits. repairs not until further notice because its way too time consuming getting everything on the site plus i haven't been able to work on my own stuff for a very long time.

You know Peter, if you didn't worry so much about everybody else in the community being able to repair their stuff you would have more time to work on your own!!
 
Back
Top Bottom