Monitor Identification Help Needed Please!

RenegadeFred

Member
Joined
Feb 3, 2012
Messages
992
Reaction score
3
Location
Lake Village, Indiana
Picked up a beat up Devastators cab on the cheap. Game actually works surprisingly, but the monitor has some fold over on the right side. So I'm trying to identify this chassis, which I've seen no markings on, so I can do a cap kit.

Now I'm here asking you monitor guru's for some help. Sorry not all pictures are the greatest, and if need be I can try to get more thou again my camera SUCKS! Any help would be greatly appreciated!
 

Attachments

  • 0807121311.jpg
    0807121311.jpg
    90.5 KB · Views: 29
  • 0807121311a.jpg
    0807121311a.jpg
    92.6 KB · Views: 21
  • 0807121311b.jpg
    0807121311b.jpg
    95.1 KB · Views: 17
  • 0807121311c.jpg
    0807121311c.jpg
    87.9 KB · Views: 16
  • 0807121312.jpg
    0807121312.jpg
    92.7 KB · Views: 18
Thanks Ken, much appreciated, I'll see if I can't find any more information on the chassis later today to help out.. Guess I should of unscrewed it from the wood to get some full pictures of it.
 
See those two small caps next to the smaller heat-sink in the center of the chassis. Change those. I think it's C310 and C313...common failure on that chassis.

Dave
COINOPSHOP
 
Thanks CoinOpShop. Valuable information for a monitor noob like me.

I've got a few other monitors. 2 - GO7's (one needing new flyback also) a Sanyo EZ20 and that (possible) Nanao to do cap kits on. So i'm starting out with the G07 missing the flyback. Stupid to start with such a thing, but gotta learn somehow right?

All of those I just picked up in various games within this week alone. I think I have an addiction?

I can't do any more harm then has already been done, if successful from there I'll move on to the others. If not, I'll just pass them on to someone more experienced.
 
Thanks CoinOpShop. Valuable information for a monitor noob like me.

I've got a few other monitors. 2 - GO7's (one needing new flyback also) a Sanyo EZ20 and that (possible) Nanao to do cap kits on. So i'm starting out with the G07 missing the flyback. Stupid to start with such a thing, but gotta learn somehow right?

All of those I just picked up in various games within this week alone. I think I have an addiction?

I can't do any more harm then has already been done, if successful from there I'll move on to the others. If not, I'll just pass them on to someone more experienced.

Was I right on those cap numbers ? C303 rings a bell too as a problem on that chassis.
 
Not sure, haven't had a time to look at it.. been busy all day today, moving a few games from my buddies garage to the house and vise versa. I'll have some time next week to start digging into those monitors.
 
Back
Top Bottom