Monitor Help Wells Garner? WG 119111 also has Phillips decal on it

robgill2008

Member
Joined
Aug 15, 2010
Messages
80
Reaction score
0
Location
Paducah, Kentucky
Monitor Help Wells Garner? WG 119111 also has Phillips decal on it

Hello, I am trying to adjust my operation wolf monitor just right. I took some pictures of the monitor test pattern....can anyone explain how I should adjust the colors here, I know that I have the red,blue and green cutoff and drive pots. I also know where the brightness and contrast are. However there are two pots facing towards the bottom of the cabinet that I don't know what they are. The CRT also has a big Phillips decal on it. I can't read the numbers.

Here are some pictures....

41307_157049854307694_100000080412818_469923_5777190_n.jpg


Can someone tell me how to adjust this test grid?

41307_157049860974360_100000080412818_469925_6326458_n.jpg
 
operation wolf wg wells garner 119111 monitor adjustment

I do not know what these two pots are for...can someone explain please?

41307_157049850974361_100000080412818_469922_3010174_n.jpg


These two pots are facing towards the bottom of the cabinet.


This is a view from the back of the cabinet. The pots I am asking about are facing down.

58640_157049804307699_100000080412818_469919_8013216_n.jpg


Thank you
Rob
 
can you try to post a better picture of the chassis - the part below the tube with all the electronic components on it? also, a better pic of the top pic - looks like most likely the brightness and focus control but it's hard to see from the pic.
 
I do not know what these two pots are for...can someone explain please?

41307_157049850974361_100000080412818_469922_3010174_n.jpg


These two pots are facing towards the bottom of the cabinet.


This is a view from the back of the cabinet. The pots I am asking about are facing down.

58640_157049804307699_100000080412818_469919_8013216_n.jpg



Thank you
Rob

One of those is usually focus and the other might be "screen" which Is like an intensity control. The phillips sticker is just identifying the tube only. Figure out which WG chassis you have and follow the instructions in the manual for how to properly adjust the monitor.

You can find most monitor manuals here...


http://arcarc.xmission.com/PDF_Monitors/
 
Back
Top Bottom