monitor flip??

It says to cut the connector in half and flip both pecies right??

Two pins control the horizontal, the other two control the vertical.
If you only need to flip one direction then you only reverse (flip) the appropriate two pins.
So if it is upside down AND backwards, then you would flip both pairs.

One pair of pins will be slightly wider apart than the other two.
DO NOT MIX THEM UP
Only reverse them on the same two pins they are already plugged into.

Depending on what your color scheme of wires is it would be something like......
RED / BLUE ...... YELLOW / GREEN
BLUE / RED ...... GREEN / YELLOW
 
Back
Top Bottom