Monitor Clicking need help with Tovis-MTG-2901CN

Jdub43

New member
Joined
Mar 4, 2009
Messages
93
Reaction score
0
Location
modesto, California
Need help, the board to my monitor is clicking and I cant tell where it is coming from. I am getting no glow from the yoke, just a tick...tick....tick...tick from somewhere on the board non stop. From looking at other posts it seems like it could be the HOT? If anyone could tell me where that is at on this board so I can test it that would help out a lot. Or where I can find schematics for this particular board.
Please someone help me Im dying to get my ms pacman cocktail up and running!!
 
are you sure the anode is connected to the tube? discharge the monitor and peel back the suction cup. My guess is that it is not connected, but very close to being in place and the clicking is the high voltage arching and that is the 'snap' that you hear.
 
I'll check that out. But it sounds more like it is coming from the actual board rather than the anode? Not sure? Thanks for the help ill let you know what i find out.
 
Back
Top Bottom