monitor chassis ID and connector question

pinnut

Active member
Joined
Aug 3, 2010
Messages
1,084
Reaction score
20
Location
New York
this is from an atari missile command cocktail game. could you please ID the chassis for me? the image has issues, mostly dropped groups of pixels. i will recap it, but would like to first hook up my new TPG and test it . the RGB input is a ribbon cable with a molex connector and i have no idea what is r,g,b, etc is on the connector. i think if i pull the chassis out i can work it out, but if a schematic is available, or someone knows, that would be helpful.

thanks much
 

Attachments

  • 20170304_153207.jpg
    20170304_153207.jpg
    205.9 KB · Views: 17
  • 20170304_153242.jpg
    20170304_153242.jpg
    205.1 KB · Views: 15
  • 20170304_153249.jpg
    20170304_153249.jpg
    198.4 KB · Views: 15
  • 20170304_153336.jpg
    20170304_153336.jpg
    206.4 KB · Views: 11
  • 20170304_153331.jpg
    20170304_153331.jpg
    216.7 KB · Views: 9
connector pic
 

Attachments

  • 20170304_153224.jpg
    20170304_153224.jpg
    188.2 KB · Views: 4
digging on the web, it looks like a 14 inch sanyo chassis , but no part number. i'll have to go over the chassis to see if i can find number. anyone have cap kits for these?

thanks
 
that is a sanyo 14" AZW and i have the top quality cap kits for them. that chassis doesn't have a header for the RGB input like the 20ez but you want use a male connector on your existing one and make an adapter to go to the TPG and i have all the parts in stock for that also.
 
Back
Top Bottom