Monitor brackets?

tinsley

Member
Joined
Mar 28, 2010
Messages
457
Reaction score
1
Location
Connecticut
I picked up a golden tee cabinet that had a 27" monitor in it. It didnt come with the monitor and I plan on using a 25" i already have. My question is, are there brackets i can use that will allow me to mount my 25" on the brackets in the cab that are already in place? I dont want to drill new holes in the side of the cabinet so I am hoping there are some sort of bracket to use for this...
 
Golden Tees did not come with 27" monitors normally. They normally had 25" monitors. In order for an upgrade to a 27" to occur, you had to drill new holes in the side (using a template provided) to move the monitor brackets (EA did this for PGA Tour conversions). So, if yours was converted to a 27", you should already have the holes in the side to move them back to the 25" position.

Otherwise you most likely already have a 25" spacing...
 
I have 2 gt cabs. One with severe water damage and the new one. The water damaged one us setup for a 25". The new one is def. different. It is for 27" and doesn't have any existing holes. The manual I found in the cab references it as having a 27" also. I was just wondering if brackets existed that would allow me to use the mounts where they were without drilling extra holes.
 
Not that I know of. You could drill the new holes, move the brackets, then put carriage bolts in the old holes...
 
Back
Top Bottom