Molex Connectors - Look

Dokert

Well-known member
Joined
Jun 3, 2007
Messages
12,751
Reaction score
141
Location
Arlington, Washington
Rating - 100%
85   0   0
It seems that there a bunch of people looking for Molex .156 connectors and pins. They can be easily found online, but the shipping seems to be the killer for most people.

Here is my offer to those in need. First, if you don't see what you need listed ask I may have it. Example: Molex .093 monitor connectors and pins. Example 2: Molex .062 connectors and pins.

If you need 1 or 2 connectors and pins shipping will be $2. I will stuff as many in the envelope as I can providing the postage doesn't exceed $1.60 to your zip.

.156 Housings with Trifurcon pins
3 pos $0.20
4 pos $0.25
6 pos $0.40
7 pos $0.50
9 pos $0.60
10 pos $1
12 pos $1
15 pos $1.25
3 pos & 6 pos $0.55

I am not looking to sell off any of my excess connectors. I am just tired of all of the whining about the high cost of shipping when you only need 1 connector and pins.

Basically, if you need 1 or 2 Molex connectors ask me and I will try to hook you up with what you need.
 
Cool , I know I need one monitor connector , not sure what size it is though , I'll have to take a picture .
 
Doh! Sorry if I put this in the wrong section. Wasn't looking to actively sell anything, just offering to help out those in need.
 
do you have anything that will work for the monitor hookup for a nanao ms8-26. i need the one for the red green blue ground and sync. its a very tiny connector
 
Anyone know where I guy can pick up a MOLEX KIT with multiples of each of the popular connectors for one price?
 
Anyone know where I guy can pick up a MOLEX KIT with multiples of each of the popular connectors for one price?

I saw somebody that was selling something like this at what I thought was a little on the high price side.

The most popular ones used are the 3, 6, 10 pos.

Give me numbers on what you want, and I will see what I can do.
 
I have an idea for a handy cable that folks might want to buy.

How about an extension cable for a WG6100? A male molex, a female molex, and say 5-6 feet of wire.

Would come in pretty handy for those who have multiple color vectors and want to figure out quickly if their problem is the board or the game. Kinda cool that all the connectors for these monitors are on one plug.
 
I have an idea for a handy cable that folks might want to buy.

How about an extension cable for a WG6100? A male molex, a female molex, and say 5-6 feet of wire.

Would come in pretty handy for those who have multiple color vectors and want to figure out quickly if their problem is the board or the game. Kinda cool that all the connectors for these monitors are on one plug.

I can make that for you if you want, but damn that is a lot of wire.
 
I saw somebody that was selling something like this at what I thought was a little on the high price side.

The most popular ones used are the 3, 6, 10 pos.

Give me numbers on what you want, and I will see what I can do.

I dunno...I think a 10 piece molex kit would rock. Perhaps like (3) 3-pin, (3) 6 pin, (2) 10-pin, and a couple other singles...maybe a 9 and a 12 (looking for suggestions)...
 
Welp, if you decide to sell kits... let me know the cost. I want one. Build a "starter kit" and PM me the price shipped to the `Ho and I'll shoot over the dough...


:)
 
I have an idea for a handy cable that folks might want to buy.

How about an extension cable for a WG6100? A male molex, a female molex, and say 5-6 feet of wire.

Would come in pretty handy for those who have multiple color vectors and want to figure out quickly if their problem is the board or the game. Kinda cool that all the connectors for these monitors are on one plug.

I made a bunch of these about 6 months ago, and once I posted that they were done, nobody who'd asked about them wanted to pay up...

...typical KLOV behavior.
 
I made a bunch of these about 6 months ago, and once I posted that they were done, nobody who'd asked about them wanted to pay up...

...typical KLOV behavior.

There is always a risk anytime you make something. Sometimes you need to take payment up front before building certain things.

[middle part of this message mod deleted]

...or just buy a bag of 100 15-pinners and cut down what you need...

It is still cheaper to buy the sizes that you need and you don't have to cut anything, Smart Guy.
 
I can make that for you if you want, but damn that is a lot of wire.

Thanks for the offer Dokert. And now that I think about it 2-3 feet would suffice. Although the games are heavy they still do move :)

I personally don't have any problem making a cable up for myself, and I am ordering enough parts from time to to time that it is no biggie to get some extra connectors in my next order.

I just thought the extention was a cool idea, but it appears to be unoriginal. Oh well.

Thanks for offering up this service, if I am ever in a bind for just some connectors I will think of you.
 
Hey Dokert your PMs are turned off , I can't pm you . I need this connector for the power to my monitor , do you have it ?

connector1-1.jpg


connector2-1.jpg
 
Dokert's pm is not shut off. He got banned for making inappropriate remarks to a derogatory post by Mark Spaeth. (HudsonArcade)

He is busy using his ban time to get caught up on some monitor projects that he has been putting off for a while.

I will pass along anything that you need in his absence.

He said, that he does NOT have any of those AMP monitor connectors. He does have the Molex monitor connectors. He also said that you can get that AMP monitor connector from Bob Roberts or Mouser, etc.
 
Back
Top Bottom