FS Parts: MOLEX 22/44 09-50-6225 Card Edge Connectors & Split Pins

Level99

Permanently Banned - Anon seller failed to verify

Donor 2016-2017
Joined
Apr 1, 2016
Messages
235
Reaction score
3
Location
California
Rating - 100%
24   0   0
MOLEX 22/44 09-50-6225 Card Edge Connectors & Split Pins

I'm cleaning out some excess today.

I have MOLEX branded parts:

Part number 09-50-6225 22/44 Pin card edge connector housings. $10ea, shipping included.

Split pins for the above, sold in 100qty bags. These are loose parts, not tape and reel parts. Each bag of 100pcs is $25 shipped.

This are new old stock Molex parts, not Chinese knock-offs.

If interested, PM me.
 

Attachments

  • MolexCardEdge01.jpg
    MolexCardEdge01.jpg
    211.6 KB · Views: 85
  • MolexCardEdge02.jpg
    MolexCardEdge02.jpg
    347.1 KB · Views: 91
  • MolexSplitPin01.jpg
    MolexSplitPin01.jpg
    294.8 KB · Views: 79
  • MolexSplitPin02.jpg
    MolexSplitPin02.jpg
    602 KB · Views: 81
  • MolexSplitPin03.jpg
    MolexSplitPin03.jpg
    1.1 MB · Views: 90
Last edited:
I don't currently have any spare 12/24 housings available.
 
That was quick.

If you're on the fence about the 09-50-6225 housings, I'm down to 4pcs. So you had better hurry. I don't have anymore of these after they're gone. $10ea on those.

I have PLENTY of the Molex split pins left for now. $25 shipped per bag of 100pcs.
 
Down to one 22/44 housing and still have plenty of those Molex Split pins!!
 
Ok, all of the housings are gone, but I still have another 16 or so bags of Split pins left. $25 per bag of 100pcs, including shipping.
 
I still have more of the Molex split pins available. They're $25 for a bag of 100pcs. These are actual NOS MOLEX parts, not Chinese crap.
 
Last call. I've got more of the MOLEX brand split pins remaining. $25 per bag of 100pcs. PM me if interested.
 
So, a quick question. Are the 44 pin edge connectors used on Atari harnesses AMP brand or molex? If molex, why couldn'
t we just repin them? Obviously a lot of them crack/split and need replacing but I figure we could reuse them if they are molex.
 
Atari used mostly MOLEX brand edge connectors on their harnesses. As long as the card edge housing isn't damaged, there's absolutely nothing wrong with re-pinning them. Now that Molex has discontinued these card edge parts, it's a good idea to reuse them whenever you can. Obviously, I use all new parts when I make my repro harnesses, but that's a different thing entirely.
 
Back
Top Bottom