Mocap Boxing Glove Sensor

kjsupe

New member
Joined
Nov 1, 2010
Messages
74
Reaction score
0
Location
Ohio
Has anyone ever successfully found a replacement sensor for Mocap Boxing? I am talking specifically about the accelerometer on the board, not the whole board itself. I have priced this board at three different places and for the most part, they are all around $300. I don't want to put that kind of money into it if I don't have to. Googling the accelerometer part number does nothing for me, I can't even find any info about it on the company's website. Without a data sheet or someone who has done this before, I can't find a suitable replacement. Any help would be appreciated. Thanks!
 
Mocap Boxing

The part is a GSX01010T. I did not have any luck finding it on that site but its a good site to know about so thanks for that. Anyone else have any input on this? Surely I am not the first person to have a glove sensor go bad and not want to pay Konami or a distributor a trillion dollars for a new one.
 
The part is a GSX01010T. I did not have any luck finding it on that site but its a good site to know about so thanks for that. Anyone else have any input on this? Surely I am not the first person to have a glove sensor go bad and not want to pay Konami or a distributor a trillion dollars for a new one.


Ever find a solution? I am having the same problem...
 
I have the entire overhead sensor assembly from a full size mo cap that I parted out last year. The sensors were working when the game was junked. Anybody want it for a few bux??

Mike
 
Have you swapped glove boards around? There are 1/2A fuses in line with the boards. If the problem follows the board then the board is bad... if it doesn't then you may have a bad wire harness or a blown fuse.
 
LMMFAO I still have the overhead sensor from 2011. Anyone need it for free? I'll never own another one of these lol. Pickup in north Baltimore county md

Mike
 
Back
Top Bottom