wxforecaster
Member
I really didn't want to do a MMAO here, but it's hard to place a value on one of these and I've had it for more than a decade.
The Good:
I've got a fully working Nintendo Dual Vs. upright. This is the system with two side-by-side monitor heads, two control panels (each with two players). All 4 coin mechs are working and keys are included for all the over/under doors. Both monitors have a nice bright display. All 4 control panel joystick/button sets + the start buttons are in good working order. Basically this is a plug & play. There are no guns.
Part of the reason this is a MMAO is because I have 3 fully working PCBs (new battery holders), and a bunch of games. However, I think I would like to keep at least one PCB and a couple PPU chips for something down the road.
PPUs:
2x 01
1x 02
2x 04
1x Top Gun
Chip Sets:
vs. Super Bros.
vs. Ice Climber
vs. Golf
vs. Top Gun (and vs. Castlevania) <-- probably will keep this one
vs. Tetris
vs. Golf
vs. Hogan's Alley (untested, but presumed working)
The marquees are for vs. Baseball and vs. Golf.
The Bad:
Cosmetically the cabinet has a few cracks and could definitely use some new t-molding. It's structurally sound for sure. Hopefully I can get some pics up soon but I need to get it out of the corner of the garage.
I really would rather see this go to a good home, so please do not ask me to part this out. I haven't seen but a couple of these and none on flea bay in the longest time. Also potentially open to trades.
In KC, MO area.
Evan
The Good:
I've got a fully working Nintendo Dual Vs. upright. This is the system with two side-by-side monitor heads, two control panels (each with two players). All 4 coin mechs are working and keys are included for all the over/under doors. Both monitors have a nice bright display. All 4 control panel joystick/button sets + the start buttons are in good working order. Basically this is a plug & play. There are no guns.
Part of the reason this is a MMAO is because I have 3 fully working PCBs (new battery holders), and a bunch of games. However, I think I would like to keep at least one PCB and a couple PPU chips for something down the road.
PPUs:
2x 01
1x 02
2x 04
1x Top Gun
Chip Sets:
vs. Super Bros.
vs. Ice Climber
vs. Golf
vs. Top Gun (and vs. Castlevania) <-- probably will keep this one
vs. Tetris
vs. Golf
vs. Hogan's Alley (untested, but presumed working)
The marquees are for vs. Baseball and vs. Golf.
The Bad:
Cosmetically the cabinet has a few cracks and could definitely use some new t-molding. It's structurally sound for sure. Hopefully I can get some pics up soon but I need to get it out of the corner of the garage.
I really would rather see this go to a good home, so please do not ask me to part this out. I haven't seen but a couple of these and none on flea bay in the longest time. Also potentially open to trades.
In KC, MO area.
Evan
