MK II Test Mode Save Settings??? Battery?

rainman154

Active member
Joined
Aug 22, 2010
Messages
2,065
Reaction score
13
Location
Buffalo, Minnesota
I got a MK II today. It is LOUD as hell right now and equally as hard.
I placed dip 8 to on to get to the Test Screen and changed the settings. I then flipped dip 8 to off and pushed the button to play. It worked great. Placed it on Freeplay, lowered difficulty and volume.

I then powered it down.

When I came back to it, it went back to the old settings???? WTF?
Does the battery need to be replaced or am I not saving it correct??
 
Thanks man. I'll give it a shot. That is what I thought the problem was, but since I have never been in the test menu, wanted to make sure I was not missing something.
 
before you replace it if you have a meter just test it, if it has less than 2.6v i'd replace it.
 
The battery is a 3v BR2325.
There is only one shop around here that has one and they are about 50 min away.
They told me there is another battery that would be similar to use, however I am not sure if I should put in something different.
 
CR2325 is the direct replacement for the factory BR2325 that came with these boards. Radioshack has them definitely they're a bit pricey but everywhere is when you talk local box store vs online.
 
Back
Top Bottom