FT - Parts: Missile Command Project FT

Thomas

Well-known member

Donor 2021
Joined
Jan 23, 2009
Messages
3,726
Reaction score
75
Location
Virginia
Rating - 100%
61   0   0
Missile Command Project - Maryland

All New ---> Repro Side Art (anthony), Control Panel (takeman), Trackball Assy , Buttons & Cones (before the ram scam). (All Not Installed)

Back up control panel, probably a 7 or 8 out of 10.

Fresh Cpu & Ar board still in box from Bit.

Needs a new back door cut and the lower piece under it. Little swollen above the back door on the two small pieces that make the angle. Solid on the top, bottom and sides. All plex and top grilles/ marquee intact. Wire harness seems to be all there. All tho I would put new connectors on it before the first run on the new boards. Monitor... well I have shit load of them and new tubes/tv's for a donor.

This is going to be a really nice M/C one day! It just needs someone to put it all together. I am freaked out about installing the new side art & I don't want to hose it.

I have pics somewhere but to tired tonight to look. There's my problem to lazy to even put the machine together! I am bored with it and think I would feel better swapping it out.

Interested in robotron, asteriods maybe a deluxe ---> hum??? What do you have?
Cabs needed - stargate, centi - these two cabs / art are crap...
 
Last edited:
Lets sweeten the pot a little bit...

---

Burgertime project (jamma) all new artwork package from malice.

CPO, Marquee & Bezel - Can be outfitted with a new 60n1 or Arcade Shop Board bootleg.

Side Art toast but very solid cab.

---

NBA Jam - No art work, lots of primer and some bondo work. Not quite there but getting really close to a smooth finish.

New Games Family Board P2.8 with both hard drives aka xxxn1. Full hyperspin drive and with new joysticks.


New jamma power supplies and harnesses...
---

Willing to trade up or down would even consider older em pins.
 
Bump to the top... Not really interested in money. Would rather change up my line up.
 
Some snaps...
 

Attachments

  • Marquee_1.jpg
    Marquee_1.jpg
    95.3 KB · Views: 28
  • Front_1.jpg
    Front_1.jpg
    97.8 KB · Views: 28
  • Back_1.jpg
    Back_1.jpg
    100.3 KB · Views: 28
  • Back_2.jpg
    Back_2.jpg
    96.6 KB · Views: 23
A few more...
 

Attachments

  • Back_3.jpg
    Back_3.jpg
    85.4 KB · Views: 17
  • Left_1.jpg
    Left_1.jpg
    88.8 KB · Views: 17
  • Left_2.jpg
    Left_2.jpg
    94.9 KB · Views: 19
I'll throw it out there.. whoever gets the MC can PM me for a cnc cut back door and lower piece for 50.00 + shipping. I can do them in black melamine so no painting required.
 
Tell you what if nobody bites I will certainly buy these from you myself. One way or the other thanks to people like you this project will live again!
 
Here is the old control panel. When I look at this it makes me think its an 8 out of 10 maybe a lil better. I didn't really need to buy the new one but I did anyway. I wanted this m/c to be flawless when done. I will shoot pictures of the new cp and post them too a little later...
 

Attachments

  • Old_control_panel_1.jpg
    Old_control_panel_1.jpg
    89.4 KB · Views: 13
  • Old_control_panel_2.jpg
    Old_control_panel_2.jpg
    92.4 KB · Views: 11
  • Old_control_panel_3.jpg
    Old_control_panel_3.jpg
    96.2 KB · Views: 11
Here is the new sideart from Anthony. I also took a picture of the lower board that belongs under the back door.
 

Attachments

  • New_sideart_1.jpg
    New_sideart_1.jpg
    95.5 KB · Views: 4
  • New_sideart_2.jpg
    New_sideart_2.jpg
    97.6 KB · Views: 5
  • Below_backdoor.jpg
    Below_backdoor.jpg
    98.1 KB · Views: 3
Ram trak-ball rebuild kit.
New control panel by takeman...
 

Attachments

  • New_trackball_kit_1.jpg
    New_trackball_kit_1.jpg
    88.6 KB · Views: 7
  • New_trackball_kit_2.jpg
    New_trackball_kit_2.jpg
    92.2 KB · Views: 7
  • New_control_panel_1.jpg
    New_control_panel_1.jpg
    93.4 KB · Views: 7
  • New_control_panel_2.jpg
    New_control_panel_2.jpg
    92.2 KB · Views: 5
Last edited:
Rebuilt cpu and ar board by bit...

I am still looking for the seal-a-meal pouch with all the new cones and buttons. I will find it but maybe not tonight. I still need to get a better picture of the brick and the harness inside the cab.

I'm telling you this will be one very nice machine someday...

...

Better pictures

http://arcadeparts.org/Machines/Atari/Missile Command/

...
 

Attachments

  • Rebuilt_cpu_1.jpg
    Rebuilt_cpu_1.jpg
    97.3 KB · Views: 4
  • Rebuilt_cpu_2.jpg
    Rebuilt_cpu_2.jpg
    98.3 KB · Views: 3
  • Rebuilt_ar_1.jpg
    Rebuilt_ar_1.jpg
    91.5 KB · Views: 2
  • Rebuilt_ar_2.jpg
    Rebuilt_ar_2.jpg
    96.1 KB · Views: 2
Last edited:
I just bought an MC this week, I have a complete one in the barn, and I stripped out a rough one that was mostly complete too.
 
Atari brick... This came with the machine and I think I confirmed it was the correct one. It has been a very long time tho so I need to confirm once more to be sure.

One thing is for-sure I would never fire up those pretty boards with out going through this brick first.
 

Attachments

  • Brick_1.jpg
    Brick_1.jpg
    94.3 KB · Views: 3
  • Brick_2.jpg
    Brick_2.jpg
    95.6 KB · Views: 3
  • Brick_3.jpg
    Brick_3.jpg
    92.3 KB · Views: 4
  • Brick_4.jpg
    Brick_4.jpg
    97.1 KB · Views: 3
Last but not least and before bed because I got to work tomorrow. Here are the 5 new buttons and cones.

All cones are short style and I have 3 black and two red buttons. All brand new.

I will answer all of your private messages. There have certainly been a lot. I am not so sure it will be tonight. Sorry it took a long time to gather up everything I had and get it documented.

To the couple of guys that wanted better pictures of the harness. I will post up some close ups in the morning or when I get off work tomorrow. I will also get all your questions answered then too.

Thanks for all the interest.

...
 

Attachments

  • New_buttons_cones_1.jpg
    New_buttons_cones_1.jpg
    90.2 KB · Views: 1
  • New_buttons_cones_2.jpg
    New_buttons_cones_2.jpg
    90.2 KB · Views: 4
Last edited:
Back
Top Bottom