Missile Command problem

tatom

Member
Joined
Oct 26, 2011
Messages
360
Reaction score
2
Location
Oregon
My Missile Command has a graphics issue. See pictures. As you play and shoot it leaves white dots on the screen. Any ideas?
 

Attachments

  • 2012-09-08_17-02-37_491.jpg
    2012-09-08_17-02-37_491.jpg
    103.1 KB · Views: 37
  • 2012-09-08_17-02-30_505.jpg
    2012-09-08_17-02-30_505.jpg
    101.5 KB · Views: 39
  • 2012-09-08_17-02-27_98.jpg
    2012-09-08_17-02-27_98.jpg
    102 KB · Views: 33
  • 2012-09-08_17-00-52_149.jpg
    2012-09-08_17-00-52_149.jpg
    103 KB · Views: 34
Mine does something similar but its lines, not dots. It only does it occasionally so I never bothered looking into it. Do the dots go away when the level changes?
 
Having some experience here, I would say you're probably in a world of shit... And it's only gonna get worse. Graphics issues have to be repaired in the board. I would suggest sending it off to someone like bit_slicer for fixin', but he's another long time member who has opted to take a break from the forums:rolleyes:

BTW, this is a repair and tech issue... please post in the proper section next time. Thank you:) Good luck
 
I tried to play your MC the other night, tatom. There's a lot more going on there. In addition to the redraw issues, I noticed the enemy warheads speeding up when I launched missiles back at them.

So, yeah. PCB problem. I haven't worked on these, so I don't know more than that.
 
I had a guy locally work on it a while back because the board was dead. This started shortly after I got it back. The dots do reset on each level. Anyone have a working board that they would sell?
 
Please move thread

Sorry for posting the thread in the wrong area please move it if you can.

Dan
 
If you haven't flipped it into test mode, you should definitely do that & see what it says. I'd be interested in the problematic board if you find a replacement.
 
Back
Top Bottom