Missile Command PCB

djw90

Well-known member

Donor 2011
Joined
May 14, 2008
Messages
13,112
Reaction score
112
Location
spokane, Washington
Rating - 100%
83   0   0
Thought I would check here, before I throw it on ebay. Im putting my extra working Missile command Pcb up for sale $110 shipped:)

or trade for??

A few things I need:

williams cocktail parts CP's, wiring harness, ect
missile command side art
centipede cocktail cp overlays and under glass overlay
 
Last edited:
Thought I would check here, before I throw it on ebay. Im putting my extra working Missile command Pcb up for sale $110 shipped:)

or trade for??

A few things I need:

williams cocktail parts CP's, wiring harness, ect
missile command side art
centipede cp overlay and under glass overlay

Can you shoot a pic of the board? I'd like to see what is missing on mine. :D
 
Can you shoot a pic of the board? I'd like to see what is missing on mine. :D

Here is a picture, It may or may not be the same board you have. There were 2 different boards, mine is the least common of the 2. I also included a link that talks about the different boards.

http://www.brasington.org/arcade/mcm/install.shtml#romsaver

missilePBC.jpg


Email me at [email protected]. I might be interested in a trade. I have 3 extra sets of Missile Command art. Raymond in Ohio

Sounds good, email sent :cool:
 
Last edited:
Here is a picture, It may or may not be the same board you have. There were 2 different boards, mine is the least common of the 2. I also included a link that talks about the different boards.

No, there's only 1 version of the board, but it can be strapped differed ways using split pads for 2708s, TMS2716s, 2516s/normal 2716s, or masked roms of different sizes.
 
Mark your prob correct, I was going off the information from the brasington link. it says.

"The more common board has 6 eproms that can be removed. The lesser common (older style) boards will have 11 eproms (10 along the edge, and 1 eprom on row 3)."

This is the version with 11 eproms:D
 
Last edited:
No, there's only 1 version of the board, but it can be strapped differed ways using split pads for 2708s, TMS2716s, 2516s/normal 2716s, or masked roms of different sizes.

Actually there's four different 'versions' of the card, each calling out a different set of memories to use. There's probably also four or more different 'revisions' of the card as depicted by the "D" in the trace layer. Although I've only ever seen a "D" rev. I'd imagine that there's probably some documents someplace that describe ECO's to mod the "D Rev" card to the four different versions, complete with part numbers for the ROMs.

Their whole ver/rev thing is counter-intuitive to me. To me, revs are slight changes to vers. Here it seems the other way around.
 
Last edited:
Actually there's four different 'versions' of the card, each calling out a different set of memories to use. There's probably also four or more different 'revisions' of the card as depicted by the "D" in the trace layer. Although I've only ever seen a "D" rev. I'd imagine that there's probably some documents someplace that describe ECO's to mod the "D Rev" card to the four different versions, complete with part numbers for the ROMs.

Their whole ver/rev thing is counter-intuitive to me. To me, revs are slight changes to vers. Here it seems the other way around.

The split pads are all documented in the schematics... the revs probably just have different 'defaults' on the split pads.
 
One slight problem. Can't find the box. Might be in the basement, might be under the Steps, bottom line is I looked for it for about 45 minutes this afternoon and I can't find the sideart anywhere. If it shows up I will let you know, but for now I would continue with your attempted sale. Not sure how I misplaced a giant box of Missile art, but I have.
 
One slight problem. Can't find the box. Might be in the basement, might be under the Steps, bottom line is I looked for it for about 45 minutes this afternoon and I can't find the sideart anywhere. If it shows up I will let you know, but for now I would continue with your attempted sale. Not sure how I misplaced a giant box of Missile art, but I have.

No prob let me know. :D
 
Back
Top Bottom