First Missile Command Cocktail -
I bought this because i always wanted a cocktail, and well, now that i have one, i really don't. At any rate, it didn't have working trackballs when i got it. It had bits and pieces of them. I installed 2 1/4" wicos in it so it would actually function. Trackballs are nice and smooth, bearings cleaned and lubed.
The monitor is a korean job, i forget the brand, but i did recap it. For it to really be right, you'll need to fiddle with the width cap, as the picture is still a bit wide for the screen.
The silkscreen instructions are there, not in the best or worst of shape, i do have some pics of them somewhere up close if your interested i can dig them out.
The bottom 2/3 of the cab is painted black, it was that way when i got it. The top is still the original woodgrain, and in decent shape. I removed and stripped and painted the legs and glass clips. Silkscreen is there and original on the cp's, and not in bad shape. Overall, this is a decent looking machine.
I'm looking to get 300 for it, but i'm willing to accept reasonable offers.
I'll also work with your shipper if you do the work of setting it up.
I realize the pics aren't the greatest. I can take more if someone's interested.
I bought this because i always wanted a cocktail, and well, now that i have one, i really don't. At any rate, it didn't have working trackballs when i got it. It had bits and pieces of them. I installed 2 1/4" wicos in it so it would actually function. Trackballs are nice and smooth, bearings cleaned and lubed.
The monitor is a korean job, i forget the brand, but i did recap it. For it to really be right, you'll need to fiddle with the width cap, as the picture is still a bit wide for the screen.
The silkscreen instructions are there, not in the best or worst of shape, i do have some pics of them somewhere up close if your interested i can dig them out.
The bottom 2/3 of the cab is painted black, it was that way when i got it. The top is still the original woodgrain, and in decent shape. I removed and stripped and painted the legs and glass clips. Silkscreen is there and original on the cp's, and not in bad shape. Overall, this is a decent looking machine.
I'm looking to get 300 for it, but i'm willing to accept reasonable offers.
I'll also work with your shipper if you do the work of setting it up.
I realize the pics aren't the greatest. I can take more if someone's interested.


