Mini Pac Monitor issue

mike11

Active member
Joined
Mar 7, 2012
Messages
1,617
Reaction score
9
Location
Pennsylvania
The monitor in my mini Ms Pac I recapped but was short a few caps...the 2.2 and the largers 1000s.......anyway the colors and pic is nice except it has a vertical shadow that scrolls from right to left,,,,,,,,,,,,????????????? Lower half of screen is a bit brighter than the top too......... where should i poke other than the caps???
Thanks
 
some of the ones you did not install are related to the issues you are having.

in order to help you further they need to be replaced to get a fresh view of the image problem.

a pic would not hurt.

Peace
Buffett
 
some of the ones you did not install are related to the issues you are having.

in order to help you further they need to be replaced to get a fresh view of the image problem.

a pic would not hurt.

Peace
Buffett


That's what I figured but was hoping for another answer lol ......
 
That's what I figured but was hoping for another answer lol ......

Literally every time I have left caps off because they were hard to get to or in some section with burned pads/traces and crap repair work… Those caps have been what was causing my problems.

Moral of the story, replace all the caps in the kit.
 
Literally every time I have left caps off because they were hard to get to or in some section with burned pads/traces and crap repair work… Those caps have been what was causing my problems.

Moral of the story, replace all the caps in the kit.
\

LOL ots funny but i was pretty sure I wouldnt get that lucky..... naturally I was out of the most common lil guys 2.2 ect..... which are always the trouble makers ......the 1uf 50v's i buy by the 100 for that reason
 
Back
Top Bottom