millipede up and running but I'd like to open the coin lock

Jjona5

New member
Joined
Jul 4, 2011
Messages
698
Reaction score
4
Location
Baytown, Texas
millipede up and running but I'd like to open the coin lock

I had quite a few vending keys but I didnt luck up and get one that would open my coin door. I was curious if there was a how to on these. I would think if I drilled in just the right place I could open the coin door with a screwdriver afterwards. Also where can I buy lights for the coin returns?

My millipede had been down for ages but I was home on R&R and finally replaced big blue and the rest of the capacitors, changed out a few chips, put in a new marquee lamp, and she is 100 percent minus that and some t moulding thats on the way.
 
I had quite a few vending keys but I didnt luck up and get one that would open my coin door. I was curious if there was a how to on these. I would think if I drilled in just the right place I could open the coin door with a screwdriver afterwards. Also where can I buy lights for the coin returns?

My millipede had been down for ages but I was home on R&R and finally replaced big blue and the rest of the capacitors, changed out a few chips, put in a new marquee lamp, and she is 100 percent minus that and some t moulding thats on the way.

I don't know that cab very good but if you can get the back open you can usually unscrew the lock cam/mech. The back lock is usually very easy to pick with a small screwdriver and a bobby pin.
 
Back
Top Bottom