***** Millipede pcb with Braze Multipede installed

HighScoreSaves

Well-known member

Donor 7 years: 2013-2019
Joined
Mar 23, 2007
Messages
15,831
Reaction score
757
Location
Blaine, Minnesota
Rating - 100%
390   0   1
I have a couple of these and decided to put one up for sale.

Millipede pcb tested and working 100% for video, game play and sound with Multipede kit installed. Play Millipede and Centipede on same cab.


Ships USPS Priority. Well protected of course...

Was tough to come up with a fair price. Kit is about $75 itself on my site. Cheapest around. ;)
Shipping is about $20 or so.
That would put the pcb itself at $265.

FREE Multipede marquee with it too!

Going at $360 shipped conus. Purchase through site. Can shoot a short video and snap a few pics if needed to show working status.
 
Last edited:
#multipedeisthebestofbothworlds

multipede_marquee_high_score_saves_1.jpg
 
Does this work in a Centipede cab?

You'll need one of these to play a Milli PCB (multi) in your Centi cab ->

millipede2centipedeadapter.jpg


Or make your own hand-wired adapter which I did many years ago before the above PCB was even available.
In any case, the adapter PCB is the easier solution. Only $35 too.
 
Last edited:
Does this work in a Centipede cab?

You'll need one of these to play a Milli PCB (multi) in your Centi cab ->

millipede2centipedeadapter.jpg


Or make your own hand-wired adapter which I did many years ago before the above PCB was even available.
In any case, the adapter PCB is the easier solution. Only $35 too.


Correct. Adapter is needed to run in Centipede cab. Thanks. Helpful information to add!
 
You'll need one of these to play a Milli PCB (multi) in your Centi cab ->

millipede2centipedeadapter.jpg


Or make your own hand-wired adapter which I did many years ago before the above PCB was even available.
In any case, the adapter PCB is the easier solution. Only $35 too.

Should have just bought one of mine which was available for several years before that one.
 
Thank you HighScoreSaves. It was a good day today. Not only did the board and the marquee show up, but the adapter from arcade shop arrived as well. Everything is working great. I put the board and marquee in a black centipede with a glowing trackball and it looks pretty nice if I do say so....works great too, very easy to install, almost plug and play. Thank you! Pictures below.
 

Attachments

  • Black-Multipede02.jpg
    Black-Multipede02.jpg
    143.8 KB · Views: 66
Last edited:
Thank you HighScoreSaves. It was a good day today. Not only did the board and the marquee show up, but the adapter from arcade shop arrived as well. Everything is working great. I put the board and marquee in a black centipede with a glowing trackball and it looks pretty nice if I do say so....works great too, very easy to install, almost plug and play. Thank you! Pictures below.

Awesomeness!
Great looking cab with that marquee too! ;) love the black cab

I do have another set ready to go. Same deal. Free marquee with purchase of pcb and kit to play Millipede and Centipede
 
I've also like to see the Multipede marquee in the cabaret size.

Scott C.

Yes. Being worked on this week. Been delaying long enough...plus, I acquired a cabaret a few weeks ago... :)

I've seen different sizing on these. Can you give measurements of each of yours?
 
Last edited:
Yes. Being worked on this week. Been delaying long enough...plus, I acquired a cabaret a few weeks ago... :)

I've seen different sizing on these. Can you give measurements of each of yours?
Great to hear. All North American Tempest, Centipede, and Dig Dug cabarets use the same sized marquees.
What different sizes have you seen?

Scott C.
 
Back
Top Bottom