Museum of the Game® & International Arcade Museum® Forums

Hello everyone, I've got an issue I'm a bit stumped on. I have a Millipede that was working great, recently it developed a bend (photo attached) the screen also went dim. I took the chassis out and recapped it and put it back in the machine, no picture at all. I took the chassis back out and cleaned it, then looked it over for any cold solder joints, I only found what I believed to be 2, I re soldered those and put the chassis back in. I still have no picture, however, every now and then when I power it on I will get a picture but it has a weird "overshadow" on the letters/numbers (piucture also attached) and then the picture completely goes away again. Very rarely sometimes there will be a blotchy flash that shows up on the monitor but no game.

Is there anything I should be looking at? I do not have a test pattern generator to test if maybe its coming from the game board.

Thank you in advance!