Millipede Beeps 3 times over and over

jerryme

New member
Joined
May 9, 2010
Messages
326
Reaction score
2
Location
Ypsilanti, Michigan
Hey I went to fire up my millipede today and the game just beeps 3 times over and over.
The Screen has rows of A's on it, and the player buttons are lit. I know this is for a bad ram, which one? Also I see a lot of threads on hear for this and it seems to be something other then the rams a lot, any suggestions where to start. Game worked fine last time I turned it on - Now I get this. Please Help. Thank You. Bart
 
I piggybacked a 2101 on m2 and the game fired up so now i just have to replace it, it looks like it had been replaced before. Should I put a socket for that chip on the board so it is seated rather than soldered?
 
If you have the socket, yes. Install one to make future repairs easier.

I would use a good quality double wipe socket and not a machine pin socket. If you break a pin off inside a machine pin socket they are very difficult do desolder from the board and tend to lift the traces off the top if not fully desoldered.
 
Back
Top Bottom