Might has screwed the pooch....

swayze2

Member
Joined
Mar 3, 2007
Messages
645
Reaction score
1
Location
LOWELL, Michigan
So I just picked up a Data East batman pinball. I had an issue with getting the GI lights on the left hand side working (purple wires). So I pulled the power supply to check for cracking in the solder joints. After I put in back in now my dot matrix just shows two horizontal lines and I have more playfield lights out. This thing is driving me nuts!! Any ideas? Should I order a completely new power supply?
 
The first thing I'd check is the connector. You could have broken or corroded contacts in the connector, or a cracked solder joint on the header pins.
 
Back
Top Bottom