Midway Wheels/Wheels II pics?

gameguy1957

Active member
Joined
Dec 9, 2007
Messages
1,203
Reaction score
10
Location
Mobile, Alabama
Anyone got pics of the inside of a Wheels or Wheels II machine? I also could use pics of the monitor area with the bezel pulled.

I've got a Wheels II that I've started working on that was converted somewhere over the years. But at least the operator had the good sense to keep the original board and bezel.

I installed the original bezel and realised that one of the changes to the machine was that the monitor was rotated.

So I need to see what the insides of an unmolested machine looks like.

Thanks,

-JM
 
Let me know if you need more (this is Wheels 2)...

Ours has a tinted green plexi over the monitor (I removed it for taking the pics), don't know if that is original or not? The glass bezel is not the original one, so maybe they put the green plexi there when they replaced the bezel...
 

Attachments

  • IMG_3812.jpg
    IMG_3812.jpg
    48.9 KB · Views: 37
  • IMG_3813.jpg
    IMG_3813.jpg
    50.6 KB · Views: 33
  • IMG_3814.jpg
    IMG_3814.jpg
    42.1 KB · Views: 33
  • IMG_3815.jpg
    IMG_3815.jpg
    44.3 KB · Views: 28
  • IMG_3816.jpg
    IMG_3816.jpg
    29.9 KB · Views: 26
Just saw the pics and they do help in a depressing sort of way.

I had the original power supply and wiring harness, but I think they got tossed a few months ago - after I cut out all of the wiring to use on other projects. The power supply that's in it is not the original.

I may have also tossed the white pieces that go to either side of the monitor. I remember seeing them, but not if they went with the other junk that got cleaned out on that last round of cleaning.

Well at least I know that the operator kept all of the parts to put it back together, I just wish he would have labeled them.

Is that a 23" b&w monitor in it? Right now mine has a large color monitor mounted horizontally in it.

I've got to go by where the game is stored today and I'll look to see if I can find the white light strips (crossing my fingers that they didn't get tossed).

Thanks,

-JM
 
Well, I found the light strips. They were still in the trash can in the garage where I tossed them last time I tried to clean up down there about six months ago.

So what I need not is a wiring harness or a wiring diagram.

Anyone out there got one?

-JM
 
I since reassembled the cab making it a little hard to measure, but 23" should be the size. B&W of course ;)

I've got a spare, so that just leaves me short a PS and wiring harness. I can build those if I can't locate a replacement.

Thanks for all of the info on it.

-JM
 
Back
Top Bottom