Midway Space Encounters

tester007

Well-known member
Joined
Jan 14, 2007
Messages
2,609
Reaction score
43
Location
Calgary, Alberta, Canada
Think I have done all I am going to do on this cab for now so want to set it back. Thing is it's missing the upper backdoor and the strobe flash and red light flash shine out the back. The back on the top area has the monitor frame and neck slightly back beyond the plane of the back so there must be a box or something similar to the back of certain Taito games i would guess on the back door. Does anyone have, or can take, a pic of the front and back of that piece?
 
I can, but it will be later in the day.

Just to make sure what you want: you want pictures of the upper back door (inside and out) showing the plastic bubble piece and how it is attached?
 
Cool... Yes, that upper door.. I need to more than likely make one so want too see what I would be getting into and what the extension part looks like exactly to find one as I would rather ship just that, than a slab 'o wood..
 
Can someone post the dimensions for the board used in the top back door for Space Encounters? I have the bubble, but no board. It looks like the bubble is centered vertically and horizontally...yes?
 
These are from my Space Encounters (full size upright). Sorry for picture size. Panel thickness is 1/2". There is a 1/4" cut on the front bottom to make a lip
 

Attachments

  • SE-bd1.jpg
    SE-bd1.jpg
    183 KB · Views: 23
  • SE-bd2.jpg
    SE-bd2.jpg
    182.3 KB · Views: 20
Back
Top Bottom