Midway Multi(home version) ?

sjfreddy

Active member
Joined
Feb 28, 2008
Messages
1,394
Reaction score
6
Location
New Jersey
I`m looking at a friend`s Midway multigame. Theres 2 disconnected wires from the board & I have no idea where they go. The red wire is DC 6V & the other is a brown ground. Anybody know where they go ? thanx fred
 
God, what a piece of junk. Post a pic of what you have and we'll see what we can come up with...
 
The board is so small I can`t get a clear pic of it. I agree, this thing is a piece of shit !!!
All i can see is the red & brown wire look as if they should go to the same area.
 
Like i said, the red wire is soldered on the board at DC:6V & the brown wire is soldered at ground on the board. Both wires are stuck together side by side but the other ends are just hanging so they have to go somewhere.
 
Probably had a voltage converter there somewhere, similar to what is used on a cordless phone....
 
ill have to dig my krap out.. i have all the guts, working because i fixed em. if i get over to the parents(free storage lol) ill dig it out and take pics.

i planed on putting the parts into a real arcade but i dont think i ever will. i think it would be better off as a supergun or something..
 
I have one pulled appart also. I need a general idea of where you are talking about. I can take a better picture of mine... are you talking about teh control panel or the actual board itself. Both areas of the PCBs are fairly well labeled.

I have an empty Defender that I'm putting it into with a 20" TV. Yes it was completely water soaked and dead... I didn't kill it.
 
The board itself. The red wire is soldered at DC:6V but the other end is hanging. The brown wire is soldered at the ground(labeled on the board) but the other end is hanging. They must go to same basic area as they are kinda stuck together side by side.
 
see the pics!! hopefully at least one turned out ok..
 

Attachments

  • IMGP3661.jpg
    IMGP3661.jpg
    92.1 KB · Views: 20
  • IMGP3662.jpg
    IMGP3662.jpg
    96.6 KB · Views: 22
  • IMGP3663.jpg
    IMGP3663.jpg
    95.8 KB · Views: 18
  • IMGP3664.jpg
    IMGP3664.jpg
    95.1 KB · Views: 20
Last edited:
more.......
and one pic just to show everybodyu how cheap the cps are on these lol

and to the original poster, sorry this took so long man. i JUST finally got my hands on this thing again tonight.
 

Attachments

  • IMGP3665.jpg
    IMGP3665.jpg
    91.5 KB · Views: 19
  • IMGP3666.jpg
    IMGP3666.jpg
    91.6 KB · Views: 21
Thanx for the pix but the board in mine is different. I`ll have to get a better camera & take some pix. thanx fred
 
dat sux!!!!

tthat was the board under the cp, mabye your after something different? can take the pcb case apart if you need pics inside there
 
Back
Top Bottom