Encom
Well-known member
I picked this up as a project a while back and got partway though fixing it up and have lost interest in finishing it. I replaced the springs and yellow buttons on the flight yoke, repaired the seat base, replaced the marquee and the side decals on the base, installed new T moulding on the base, rebuilt the monitor and started the body work on the main cabinet.
It was at this point my son let me know that he really would rather a Crusin World instead. As it sits now, it plays and works fine but needs some work to be completely finished. It needs the upper corner of the cabinets finished and the artwork touched up, there are a couple of other spots that have some dents that need to be fixed and finished.
A few of the LEDs on the control panel don't work properly and the one view button is always light. It also needs a plate to fill the hole left by the DBA that was pulled out. I will include the T moulding I bought for the cabinet. $450 or trade on other coin op equipment.
Pickup only zip 17319
For some reason I can't upload the pictures but I do have them, I will try to upload them again later.
Thanks
Rich
It was at this point my son let me know that he really would rather a Crusin World instead. As it sits now, it plays and works fine but needs some work to be completely finished. It needs the upper corner of the cabinets finished and the artwork touched up, there are a couple of other spots that have some dents that need to be fixed and finished.
A few of the LEDs on the control panel don't work properly and the one view button is always light. It also needs a plate to fill the hole left by the DBA that was pulled out. I will include the T moulding I bought for the cabinet. $450 or trade on other coin op equipment.
Pickup only zip 17319
For some reason I can't upload the pictures but I do have them, I will try to upload them again later.
Thanks
Rich
Attachments
Last edited: