Midway Galaga cabinet parts + Double Dragon PCB (Maryland)

sk8ersublime

Well-known member
Joined
Mar 7, 2010
Messages
2,067
Reaction score
62
Location
Frederick, Maryland
Rating - 100%
24   0   0
Midway Galaga cabinet parts (Maryland)

I picked up a Capcom bowling from a friend of mine who was going to take it to the dump. It was in a Galaga cab. He called me first so I took the cab. I got it home and when I took a close look at it, it was water logged particle board and was full of mold as it was left outside in the rain for the past few days and was in a shed before that... not keeping that. The cab is dead and gone. But I have all of the parts from the cab except the wheels from the bottom.
Before I parted the cab, i did fire up the game and it worked fine other than the trackball which needs to be rebuilt, so Ill probably keep it and rebuild it.

I have all the items below, and I have the original hardware with them.


1. Monitor Mounting brackets - $30 shipped
4. Back handles - $10 shipped
7. Coors light bowling Marquee w/plexi (fitted for Midway Cabinet)
8. Glass from Cabinet (no artwork, just white around the boarders) - FREE local only
9. Midway Coin Box - $10 shipped
10. Nintendo VS. PCB Cage - $25 shipped

I have all the little switches and power transformers as well, but they are not in the best of shape. The back door switch may be ok. I dont have the power supply as this was wired to jamma and had a switching PS installed.

IMG_0321.jpg


I would like to sell the items above or trade for/towards a few things I need to finish my nintendo cabs and other stuff I would like.

1. 2 Orange Nintendo buttons - repo or original (needed for my Mario Bros.)
2. Clear joystick disc for a DK control panel
3. Inverter board
4. VGA to CGA converter (allow output from VGA on PC to a CGA monitor)
5. ArcadeVGA (pci-e)

I plan on going to DogP's repair/arcade party in VA, so I could bring stuff with me if people want anything. Let me know if anyone is interested in anything.

Thanks for looking!
Chad
 
Last edited:
I might have the brackets you need, but I need to check when I get home. My Pacman cab was converted into a Playchoice and I believe the brackets were on the top and bottom of the vertical monitor instead of the sides. I am converting back to a Pacman and don't need them.
 
I might have the brackets you need, but I need to check when I get home. My Pacman cab was converted into a Playchoice and I believe the brackets were on the top and bottom of the vertical monitor instead of the sides. I am converting back to a Pacman and don't need them.

Let me know. I just need them to fit into my DK cab. I was gonna try to fit the midway ones in, but they are about an inch or two too long
 
The double dragon was in my Mario wide body and worked when I got it after I adjusted the switching power supply. I was able to play through the first level completely, then I turned it off as I was more interested in getting the game restored to Mario.
 
Free bump and thanks for the sale. The Coors Light PCB and manual made it safe and sound and it'll be neat to have to swap in and out of my Capcom Bowling cab. :)

Glad to hear it made it. It's fun, I've never played any of the other versions. The little animations made me chuckle though. Enjoy!
 
Back
Top Bottom