----
Coin door pin out
----
I believe this link below belongs to one of the members here. He has a warning at the bottom of the page for his new diagram.
http://www.priglmeier.com/arcade_projects/wiring_coin_doors.html
So can anyone confirm the bottom diagram is in fact correct? Or is there a better way?
Ken's Pin Outs...
http://forums.arcade-museum.com/showthread.php?t=100285
----
How to remove the Midway logo rivets.
----
http://www.youtube.com/watch?v=lIKA3EYwK5Y
http://forums.arcade-museum.com/showthread.php?t=98771
I am working on a burgertime...
Coin door pin out
----
I believe this link below belongs to one of the members here. He has a warning at the bottom of the page for his new diagram.
http://www.priglmeier.com/arcade_projects/wiring_coin_doors.html
So can anyone confirm the bottom diagram is in fact correct? Or is there a better way?
Ken's Pin Outs...
http://forums.arcade-museum.com/showthread.php?t=100285
Well, according to the Galaxian manuals, these are the wire colors/functions:
Red: common to coin sw, service credits sw, test sw, and tilt/slam switch (if installed, many Galaxians did not have this switch).
Orange-black: coin switch N.O. terminal (both coin switches were wired in parallel).
Blue: Tilt/Slam switch (if installed)
Red-Green: service credits switch
Orange-White: Test switch
Blue-Red: coin meter (cathode side of the diode)
Green-White: coin meter (anode side of the diode)
Always keep in mind that during that period of the game's manufacture, Midway may have substituted wires of another color due to wiring shortages during production.
Later Midway door wires are:
White: coin meter cathode side
White-yellow: Coin meter #1 (or just a single meter) anode side
White-blue: coin meter #2 (if a dual meter door) anode side
Orange-Green: coin switch N.O. terminal (if wired parallel)
Brown-white: coin switch # 1 (if wired seperate)
Brown-black: coin switch # 2 (if wired seperate)
Blue-yellow: tilt/slam switch
Green-red: coin door lights (12 volts)
Orange-red: coin door lights (12 volts)
----
How to remove the Midway logo rivets.
----
http://www.youtube.com/watch?v=lIKA3EYwK5Y
http://forums.arcade-museum.com/showthread.php?t=98771
I am working on a burgertime...
Last edited:
