Midway coin door inserts and Rikitiki?

FlashbaxArcade

Active member
Joined
Jun 2, 2009
Messages
1,521
Reaction score
11
Location
Burleson, Texas
ok who has the original midway coin door 25 cents(with the cents symbol) or repro-ed them?

also, is Rich @ thisoldgame.com still around here? i have pm-ed and emailed from his website to ask about "out of stock" items cause i was going to make a big order but he hasn't responded to either, twice now(first about a month ago or so).

it seems that a lot of his things are out of stock now and just wondered why or if he's just not making/selling the items anymore???
 
This is what I found on his website:

holidaze.jpg
 
I emailed him for these very same items back in July and never got a response. Luckily I was able to pick up 2 sets from a great member here.
 
Try to PM him. I got a response within 24hrs to a PM I sent a few days ago.

His site is answered by an employee if I'm not mistaken.
 
yeah sorry on any delays via email Ive been trying to check in on those and can do Pms here
when I have connection. Ill be back in action after the 1st.


But on the inserts Ive been out of both Midway styles and the early Atari ones for a while.
A few notes:There have been NO repros done like the originals that Im aware of
meaning SCREEN PRINTED on plexi with red flouresent inks.
These are alot of work for such a small piece
Im looking into some other possiblites to do these again
But the one thing that would maker it easier would be to have them laser cut

Not sure if Troy is still going through with the Midway Coin Doors but if he is
Im sure there be a need for a fresh new batch ;)
 
yeah sorry on any delays via email Ive been trying to check in on those and can do Pms here
when I have connection. Ill be back in action after the 1st.


But on the inserts Ive been out of both Midway styles and the early Atari ones for a while.
A few notes:There have been NO repros done like the originals that Im aware of
meaning SCREEN PRINTED on plexi with red flouresent inks.
These are alot of work for such a small piece
Im looking into some other possiblites to do these again
But the one thing that would maker it easier would be to have them laser cut

Not sure if Troy is still going through with the Midway Coin Doors but if he is
Im sure there be a need for a fresh new batch ;)

I'm working with Rich to see if I can help produce these a little easier.
 
Back
Top Bottom