Metal CP - Romstar...?

daley

Member

Donor 2011
Joined
Nov 15, 2011
Messages
396
Reaction score
0
Location
San Rafael, California
Rating - 100%
12   0   0
So, I am looking for a control panel for this Romstar cab I have. I know Romstar did a lot of conversions so not sure if they had cabs specific to them.

Attached are picture of the cab and of the cp I am looking to get a second of. I would like the same cp but preferably one that already has the holes set up for two joysticks and two buttons each. (player start buttons as well). Though the correct number and layout of isn't isn't required. Primarily just looking for a second cp that I can drop in to the cab.

The cp is 23 7/8" wide. Kind of hard to report on the other measurements as there are so many bends. If you think you have something that will work for me, let me know and we can compare notes.

Thanks!!
 

Attachments

  • WP_000416.jpg
    WP_000416.jpg
    98.7 KB · Views: 7
  • WP_000418.jpg
    WP_000418.jpg
    100.5 KB · Views: 5
  • WP_000420.jpg
    WP_000420.jpg
    95.8 KB · Views: 4
  • WP_000422.jpg
    WP_000422.jpg
    94.5 KB · Views: 4
Back
Top Bottom